GTA 6 60fps
GTA 6 has no 60fps mode on any console. A PS5, an NVIDIA RTX PC and the free Veyra app can show it at 60fps. What you need, the settings and the input lag.
By GTA6Wire StaffPublished 10 min read

On this page
GTA 6 has no 60fps mode. Rockstar says the game targets 30 frames per second on every console, PS5 Pro included. What players are doing instead is sending the console picture to a PC with an NVIDIA RTX graphics card, which draws a new frame between each pair of real ones and puts about 60 frames per second on the screen.
It works, with one catch you should know before buying anything: the game still runs at 30fps on the console. It looks smoother, but it does not react faster. We have not tested this setup ourselves; this guide is based on the tools' own documentation and on outlets that covered it.
Is there a 60fps mode in GTA 6?#
No. Rockstar's pre-load post says the game was built for the current consoles, "targeting 30 frames per second while pushing both platforms to their absolute limits". On the PS5 Pro, Rockstar promises "improved clarity through PlayStation Spectral Super Resolution (PSSR) and ray-traced shadows", not more frames. Rockstar has announced no performance mode, and the post does not promise one later. Our 30fps story and PS5 features guide have the details.
So any "GTA 6 60fps" you see today comes from a PC, not from the console.
How the 60fps trick works#
The PS5 sends a 60Hz signal even when the game draws 30 frames, so every second frame is a copy. Phosphen, a modder who published a GTA 6 setup for it on GitHub, counted the frames in a 41-second PS5 recording: 2,475 frames, only 1,245 of them different, which is 30.1 real frames per second.
The PC app removes those copies first, then uses frame generation to draw a new picture between each pair of real frames. That gives about 60 different frames per second. As VideoCardz puts it, the result "can appear smoother, but game simulation and controller response still operate at the console's original rate".
The app everyone uses for this is Veyra, a free, open-source Windows video enhancer by a developer called Likely7. It can open a PS5 Remote Play session itself or read a capture card, and it runs NVIDIA, AMD and Intel upscaling and frame generation on the picture. Phosphen's figures for an 80-second clip are 29.5 frames per second before Veyra and 59.0 after. TweakTown points out that most of that clip came from IGN's PS5 Pro footage rather than a live Remote Play session, and that nobody has verified the numbers independently.
What you need#
- A PS5 or PS5 Pro with GTA 6. Both run the game at 30fps, so the method is the same.
- A Windows 11 PC. Veyra's README lists Windows 11 64-bit and DirectX 12 as requirements.
- An NVIDIA RTX graphics card, ideally RTX 40 or RTX 50. Phosphen's preset uses DLSS Frame Generation on RTX 40 and 50 cards, a compatibility mode on RTX 30, and no frame generation at all on RTX 20. GameSpot also reports a recommendation of RTX 40 or newer. Veyra has an AMD build, but NVIDIA's own video frame generation (VFG) only runs on NVIDIA cards.
- A way to get the picture into the PC. Either PS5 Remote Play over your home network (free, 1080p at most) or an HDMI capture card (sharper and less lag, but you have to buy one).
- A controller plugged into the PC by USB if you use Remote Play. Veyra's streaming guide says Bluetooth does not work for streaming.
Option 1: Remote Play, no extra hardware#
This is the cheapest way and the one Phosphen documents step by step.
- On the PS5: go to Settings > System > Remote Play and turn on Enable Remote Play.
- On the PC: download Veyra from its GitHub page and pick the NVIDIA package. Extract the zip into a new folder and run
veyra_qml_ui.exe. There is no installer. Phosphen also offers a one-line PowerShell script that installs Veyra and checks the file; it is optional, and downloading Veyra yourself does the same job. - Pair the two. In Veyra, pick PS5 streaming on the home screen and click Get Account ID, which opens a lookup site called PSNTools. Copy the account ID it gives you back into Veyra. Then on the PS5, open Settings > System > Remote Play > Link Device (some menus say Pair Device): type the 8-digit code into Veyra. Phosphen notes that the code expires after a few minutes, so have the PC ready first.
- Set the stream to 1080p at 60fps. In Veyra, open Settings > PS5 streaming and choose 1080p · 60 fps with the H.265 codec. Leave the source at 60: Veyra removes the copied frames by itself since version 2.1.6, and Phosphen warns that "frame generation fed with copies makes stutter instead of smoothness".
- Turn on frame generation. In the top bar, open Pro mode, go to the frame generation settings and set the multiplier to 2X on a 60Hz monitor (Phosphen uses 4X on a 120Hz screen). Go fullscreen. Hold V at any time to see the original picture next to it.
The developer's own advice is to start with every effect off, check that picture and sound work, and then turn effects on one at a time.
PC Gamer says one of its writers could not get the tool to link up to his PS5, so pairing can take a few tries. Our guide to playing GTA 6 on PC covers the Remote Play setup and its limits in more detail.
Option 2: a capture card, for less lag#
Remote Play compresses the picture and sends it over your network. Game Rant says it adds "quite a bit of input delay" and recommends a capture card instead. Veyra's wiki agrees: streaming is limited to 1080p and blurs when the camera moves, so it suggests a capture card for 4K.
What you need, according to GameSpot: a capture card that takes 4K over HDMI 2.1, a certified USB-C 3.2 cable, and a USB port that really runs at USB 3.2 Gen 2.
- Wire it up. PS5 HDMI out into the capture card, capture card into the PC by USB. If the card has an HDMI passthrough, your TV can stay connected.
- Set up the PS5. The template in Veyra's wiki sets Screen and Video > Video Output to 60Hz rather than Automatic or 120Hz, and turns off HDCP under Settings > System > HDMI. With HDCP on, the capture card shows a black screen.
- Pick the card in Veyra. On the home screen choose Capture card, select your device, a 60fps mode and the NV12 format, which the wiki lists as the lowest-latency choice.
- Remove the copies. Set the content cadence to capture 60→30, the setting the wiki gives for 30fps PS5 games. It also says to capture at 60 rather than 30: one user reported 60 to 80ms of delay from a 4K30 capture alone, and the developer says capturing at 60 cuts that in half.
- Turn on frame generation at 2X, as above.
Which frame generation to pick#
Veyra offers several frame generation engines, and users do not agree on the best one:
- DLSS Frame Generation is what Phosphen's preset uses on RTX 40 and 50 cards.
- NVIDIA VFG (video frame generation) is the developer's choice for a 30fps PS5 game, with this example: "Ghost of Yotei at 30 fps, VFG high quality, 3x".
- XeSS is the one many users in Veyra's community groups prefer, because it shows less of the wobbly "jelly" effect. The settings guide reports that DLSS frame generation "has the worst image errors (including ghosting)" in their tests.
Our advice: stay at 2X to reach 60, try DLSS and VFG, and keep the one that shows fewer artifacts around Jason and Lucia when you run. Higher multipliers only make sense on a 120Hz or faster screen, and one user calls DLSS at 5X and 6X "basically unusable". For NVIDIA Low Latency, the same guide says to pick On rather than On + Enhanced when the card is busy, because Enhanced made the driver wait 4 to 18ms more per frame in the developer's tests.
What about "DLSS 5"?#
Most posts about this method also mention DLSS 5. In Veyra that is a separate setting, neural rendering (NR), an AI filter that changes how faces and lighting look. You do not need it for 60fps, and it costs GPU time: Phosphen measured 4.1ms per NR layer on an RTX 5080. It is not the real DLSS 5 either. NVIDIA's version needs data from the game engine, such as motion vectors, while Veyra only sees the finished video, as TweakTown and VideoCardz explain. Veyra's own README says its community runtimes are "not vendor certification or a complete official DLSS 5 integration". If you only want smoother motion, leave NR off.
How much input lag to expect#
Three delays add up:
- The game itself. At 30fps, each frame already takes about 33ms, and frame generation cannot change that. Veyra's settings guide calls frame generation "the icing on the cake, not a rescue".
- Getting the picture to the PC. Remote Play adds a network delay. With a capture card, one user's estimate in Veyra's wiki is "usually around 50ms" for the card plus 15 to 20ms for the app, about 70ms in total.
- The processing. Phosphen measured about 12ms per frame on an RTX 5080 with frame generation and two NR layers on. Frame generation itself took 1.5ms in the same test, plus 2.1ms for the motion analysis (optical flow) it relies on.
In our view, that is fine for driving around Leonida, long missions and photo mode, and a worse fit for gunfights where you want the fastest reaction. If the delay bothers you, turn frame generation off first and check whether it is the stream or the processing.
Other ways: Lossless Scaling and Sony's own app#
Lossless Scaling is a paid Steam app that adds frame generation to any window, so you can put it over a Remote Play window. It runs on most graphics cards, not only NVIDIA, and on Windows 10. PC Gamer warns that the copied frames in a Remote Play stream will likely make its frame generation stutter, and suggests using it for upscaling only. Veyra removes those copies before generating frames, which is why most GTA 6 guides use it.
Sony's own PS Remote Play app shows GTA 6 on your PC but adds no frames: you get the same 30fps as on the console.
Is it safe?#
Nothing here touches the console or the game files. "It is video processing on your PC," as Phosphen's README puts it. Neither Sony, Rockstar nor NVIDIA supports these tools, though, so help comes from their GitHub pages and communities.
Download Veyra only from its GitHub page. Its README also mentions a crypto token made by fans with Veyra's name, and says it "is not an official Veyra release". Veyra itself is free (donations are optional), so do not pay anyone for a copy.
Will Rockstar add a 60fps mode?#
Rockstar has not said. GTA 5 is the closest example: according to Kotaku, it only got a 60fps option with its later PS5 and Xbox Series X|S release, and Red Dead Redemption 2 still had no official 60fps update on newer consoles when Kotaku wrote that in August 2026.
The other route to a real 60fps is the PC version. Rockstar has not announced one, but GamesBeat reports, citing four anonymous industry sources, that it is planned for the first quarter of 2027. Our GTA 6 PC guide tracks what is official. Until then, a PS5 plus an RTX PC is the only way to see GTA 6 at 60fps, and we will update this guide if Rockstar adds a performance mode.
Frequently asked questions
Does GTA 6 have a 60fps mode?
No. Rockstar says GTA 6 targets 30 frames per second on PS5, PS5 Pro and Xbox Series X|S, and it has announced no performance or 60fps mode. The only way to see it at 60fps today is to send the console picture to a PC that adds frames with frame generation.
Can a PS5 Pro run GTA 6 at 60fps?
No. On the PS5 Pro, Rockstar promises a sharper image through PSSR and ray-traced shadows, not a higher frame rate. The Pro also targets 30fps.
Does 60fps with frame generation make GTA 6 more responsive?
No. The game still runs at 30fps on the console, so it reacts to your controller like a 30fps game. Frame generation makes motion look smoother, and the streaming or capture step and the processing on the PC add some delay on top.
Sources
- Pre-Load Grand Theft Auto VI Now (Rockstar Games, accessed )
- gta6-dlss5 (README) (Phosphen on GitHub, accessed )
- Veyra-NRVideo (README) (Likely7 on GitHub, accessed )
- Guide 02: Features and Settings (Veyra wiki on GitHub, accessed )
- Guide 05: Console and Streaming (Veyra wiki on GitHub, accessed )
- Modders already run GTA VI with DLSS 5 and Frame Generation on PCs through PS5 Remote Play (VideoCardz, accessed )
- If you're fed up of GTA 6 at 30 fps, this tool gets it up to 60 and injects DLSS 5 if you have a powerful enough gaming PC (PC Gamer, accessed )
- You Can Play Grand Theft Auto 6 At 60fps Using This Absurdly Complicated Method (GameSpot, accessed )
- How to Get 60 FPS in GTA 6 With PC Frame Generation (Game Rant, accessed )
- GTA 6 running at 60 FPS with RTX 5080 and DLSS 5 through PS5 Remote Play, modder claims (TweakTown, accessed )
- Lossless Scaling (Steam, accessed )
- GTA 6 Will Be 30FPS At Launch, Rockstar Reportedly Not Sure About 60FPS Performance Mode (Kotaku, accessed )
- Grand Theft Auto VI's PC release is slated for Q1 2027 (GamesBeat, accessed )
Spotted a mistake? Report a correction. See our editorial policy.


